The seller shows you a $2.4M company billing $85 an hour on government HVAC work. You assume 40% gross margins because that’s what you’d expect at those rates. You’re wrong — and the gap is hiding in the prevailing wage compliance costs that never show up on the summary P&L the broker hands you.
You’re looking at an HVAC acquisition that does government work. Schools, municipal buildings, military housing, federal offices. The billing rates are $65 to $90 an hour — $20 to $30 higher than the same company charges on residential service calls. The top-line revenue looks fat. The margins, on paper, look even better.
They’re not.
Prevailing wage work inflates the revenue line and the labor cost line at the same time. But the labor cost inflation is scattered across half a dozen expense categories that don’t all live in COGS. Some are in admin overhead. Some are in outside services. Some hit the balance sheet as accrued liabilities. And if you’re reading the P&L the way most buyers do — total revenue minus total COGS — you’re calculating a gross margin that doesn’t exist.
I watched a buyer walk away from a deal in year two because the government contract margins he’d modeled at 38% were actually running at 22%. That’s not a margin of error. That’s a business model change he didn’t sign up for.
What Prevailing Wage Actually Does to the Revenue Line
The Davis-Bacon Act requires contractors on federal construction projects over $2,000 to pay “prevailing wages” — rates set by the Department of Labor that reflect local union-scale compensation for each trade classification.
For HVAC work, that means your journeyman who earns $28 an hour on residential calls must be paid $45 to $65 an hour on covered federal projects. Your billing rate goes up to $65–$90 to cover that increase plus overhead and profit.
Here’s where the mirage starts.
The higher billing rate isn’t margin. It’s pass-through. You bill $85 instead of $55 because you’re paying $55 instead of $28 in total labor cost. The extra $30 in revenue carries an extra $27 in labor — your actual margin improvement per hour is roughly $3, not $30.
Most buyers see the $85 billing rate and anchor on it. They compare it to residential rates and assume the government work is the premium segment. In reality, the margin per labor hour on a prevailing wage job is often lower than on a $55/hour residential service call where you’re paying $22 in total labor cost.
The math:
- Residential call: $55/hr billing, $22/hr labor = $33 gross margin per hour (60%)
- Prevailing wage job: $85/hr billing, $55/hr labor = $30 gross margin per hour (35%)
That’s before compliance costs.
The Hidden Compliance Cost Stack
Prevailing wage work doesn’t just cost more per hour at the payroll line. It generates an entire overhead layer that residential and standard commercial work don’t carry.
Fringe benefit calculations. Davis-Bacon rates include a fringe component — health insurance, retirement, training fund contributions — that must be paid in cash or in-kind benefits meeting DOL specifications. The fringe obligation runs $15 to $25 per hour on top of the base wage. If the company’s existing benefits don’t fully offset the fringe requirement, the difference gets paid as a cash supplement on the paycheck.
That supplement doesn’t always appear as “labor cost” on the P&L. Some companies book it to benefits expense. Some book it to a compliance line item. Some bury it in owner draws if the owner was doing the prevailing wage work himself. If you’re evaluating the company using the standard SDE add-back framework, you need to verify that prevailing wage fringe costs are landing in the right place.
Certified payroll. Every week, every prevailing wage project requires a certified payroll report — WH-347 forms — submitted to the contracting agency. The report must show each worker’s classification, hours by day, gross pay, deductions, and net pay. The contractor’s principal signs it under penalty of perjury.
Most HVAC companies outsource this. Cost: $500 to $1,500 per month, depending on project volume and worker count. That’s $6,000 to $18,000 per year in pure compliance overhead that evaporates the day you stop doing government work.
Record retention. Davis-Bacon requires three years of payroll records retention in auditable form. State prevailing wage laws — which run in parallel on state-funded projects — often require longer. Many companies keep everything digitally now, but the audit-readiness standard is real. You need to be able to produce original timecards, signed payroll certifications, and fringe benefit disbursement proof on request.
Audit exposure. The DOL’s Wage and Hour Division conducts compliance investigations. State labor departments do their own. A finding of underpayment triggers back wages, penalties, and potential debarment — meaning the company can’t bid on government work for up to three years.
If you’re acquiring a company with active prevailing wage projects, you’re acquiring the audit risk for every project in the retention window. That’s a liability that doesn’t appear on the balance sheet but absolutely affects what the company is worth.
Stack it all up:
| Compliance cost | Annual range |
|---|---|
| Fringe benefit cash supplements | $15,000–$60,000 |
| Certified payroll service | $6,000–$18,000 |
| Additional bookkeeping / payroll admin | $5,000–$12,000 |
| Audit preparation and retention | $2,000–$5,000 |
| Total compliance overhead | $28,000–$95,000 |
On a company doing $600K in government work, that compliance stack represents 5% to 16% of government revenue — pure overhead that the residential side of the business doesn’t carry.
The Non-Assignment Problem
Here’s the part that changes valuations.
Government contracts frequently include non-assignment clauses. The contract is between the agency and the entity — and sometimes the individual — that won the bid. When ownership changes, many of those contracts can’t simply transfer. They require rebid, requalification, or at minimum the new owner’s separate approval.
Federal contracts: Most federal HVAC service contracts include FAR 52.232-23 (Assignment of Claims) and novation requirements under FAR 42.12. A change of ownership triggers a novation agreement — the government has to consent. They often do, but it takes 90 to 180 days and requires the new owner to demonstrate the same qualifications.
State and municipal contracts: Rules vary wildly. Some states allow assignment with agency consent. Others require full rebid. A few void the contract automatically on change of ownership.
Small business set-asides: If the seller won contracts through SBA 8(a), HUBZone, or woman-owned small business set-aside programs, those certifications belong to the seller’s entity. The buyer may not qualify. That revenue disappears at close. The SBA’s contracting page lays out the eligibility requirements — check them against your own profile before you assign value to set-aside revenue.
What does this mean for valuation?
If 40% of the company’s revenue comes from government contracts that can’t be assigned, you’re not buying a $2.4M company. You’re buying a $1.44M company with the option to pursue $960K in government work — work you’ll have to win competitively, from scratch, after closing.
That option has value. But it’s not $960K of value. And it definitely shouldn’t be multiplied by 3x.
How to Segment the P&L During Due Diligence
Stop reading the summary P&L. You need to decompose the financials month by month and then split them by revenue source.
Step 1: Separate government revenue from market-rate revenue.
Request the last 36 months of revenue by job, coded by contract type: federal prevailing wage, state prevailing wage, non-prevailing-wage government, commercial, and residential. If the seller’s books don’t segment this way, that’s a yellow flag — a company doing meaningful government work tracks it because the payroll reporting demands it.
Step 2: Calculate gross margin by segment.
Don’t just pull the blended gross margin. Calculate it independently for:
- Federal prevailing wage jobs
- State prevailing wage jobs
- Standard commercial work
- Residential service and install
You will typically find that government work runs 20–28% gross margin after true labor cost, while residential service runs 55–65%. The blended number — which is what the broker quotes — lands somewhere in between and flatters the government work.
Step 3: Allocate compliance overhead.
Take the certified payroll costs, the additional bookkeeping, the fringe supplements, and the audit-related expenses, and load them onto the government segment. Now recalculate segment margin.
Step 4: Apply the assignment filter.
Of the government contracts, which ones have assignment clauses that permit transfer? Which require novation? Which require rebid? Which depend on set-aside certifications the buyer won’t hold?
Only the transferable contracts go into your valuation model at full value. Everything else gets discounted or excluded.
Step 5: Run the blended multiple on segmented earnings.
A common mistake: applying a single 3x multiple to blended SDE. Instead, value the segments independently. The residential book with 60% margins and recurring maintenance contracts might be worth 3.5x. The government book with 24% margins and non-transferable contracts might be worth 1.5x or less.
The difference between these two approaches can move a deal by $200K to $400K on a $2M company. That’s not a negotiating tactic — it’s accurate math.
When Government Work Is Actually Valuable — and When It’s a Trap
Government HVAC work isn’t inherently bad. I know companies that built solid, profitable operations around it. But the value depends on specific characteristics.
Government work is valuable when:
- The company holds long-term IDIQ (indefinite delivery / indefinite quantity) contracts with multiple task orders per year
- Prevailing wage rates in the local market genuinely exceed the compliance cost premium
- The company has an established bonding history and relationship with a surety
- Contracts are structured to survive ownership changes (stock sale, or explicit assignment provisions)
- The company has the certifications (8(a), HUBZone, SDVOSB) and the buyer qualifies to maintain them
- Government work represents a diversification hedge — 15–25% of revenue, not the core
Government work is a trap when:
- It’s the majority of revenue and the margins are 22% or less after compliance costs
- Contracts are project-based with no recurring component — the company must rebid constantly
- The seller’s personal relationships with contracting officers are the real sales channel
- Set-aside certifications don’t transfer to the buyer
- The company has compliance gaps or incomplete certified payroll records that create debarment risk
- State prevailing wage thresholds are low — some states trigger at just $2,000, meaning even small municipal jobs carry the full compliance burden
The worst version is a company where government work grew to 50%+ of revenue because the owner found it easy to win — good relationships, the right certifications, steady flow — but every dollar of that revenue is tied to conditions that evaporate at closing. You’re paying 3x for revenue you can’t keep.
The Due Diligence Checklist for Government HVAC Revenue
Before you close on any HVAC company with government contracts, request these five things.
1. A complete contract schedule with assignment language.
Every active government contract, with the specific clause governing assignment or change of ownership highlighted. Your attorney reviews each one. “The seller says they’re transferable” is not sufficient.
2. Certified payroll records for all active and recent projects.
You want the signed WH-347 forms, not summaries. You’re checking two things: compliance completeness (are there gaps?) and true labor cost per hour on government work. If the seller won’t produce these, walk. They’re required by law to have them.
3. Three years of revenue and margin by contract type.
Not blended. Segmented. Federal prevailing wage, state prevailing wage, standard government, commercial, residential. If the seller’s accountant can’t produce this breakdown, budget $3,000–$5,000 for a forensic bookkeeper to reconstruct it from job costing records.
4. A list of all set-aside certifications and their transferability.
8(a), HUBZone, SDVOSB, WOSB, state MBE/WBE — whatever the company holds. For each one: does it transfer in a stock sale? Does it transfer in an asset sale? Does the buyer independently qualify? Revenue tied to non-transferable certifications gets zeroed in your model.
5. Compliance history — audits, findings, and corrective actions.
Has the DOL or any state labor department audited the company? Were there findings? Were back wages paid? Is there any pending investigation? An open investigation at closing is a liability you’re buying. A debarment finding within the last three years may mean the company can’t bid — and if government work is the core revenue stream, you’re buying a company that can’t sell to its best customer.
The Bottom Line
Government HVAC work pays higher rates. It does not necessarily produce higher margins. The compliance costs, fringe obligations, and assignment restrictions compress what actually flows to the owner — and if you’re building a growth strategy around government contracts, you need to price all of that in before you model the upside.
The seller’s P&L shows $85/hour billing rates and you calculate a beautiful gross margin. But the true margin lives underneath the fringe supplements, the certified payroll fees, the audit exposure, and the clause in the contract that says the agency has to approve you before you collect another dollar.
Run the segmented numbers. Discount the non-transferable revenue. And if the deal still works at the real margins — you might have a good one.
Just make sure the number in your model is the number in your pocket, not the one on the seller’s summary sheet.